OxO foot pedal mode fix

Sometimes the foot pedal need a reset of the 'MODE'. The MODE determines the device that the pedal controls.

1. Turn on the OXO Pedal.

   
   

2. 

   Press and hold the MODE button (see picture). The red LED will flash once per second from 1 to 7 flashes. The number of flashes corresponds to the MODE number. The required MODE for the OxO foot pedal is MODE 5 - see setting instructions below. Be sure to count the flashes.

   
   
3. Release the MODE button following the number of flashes that reflects the desired MODE. The blue and red LEDS will flash together the number of times indicating which MODE has been set.

You need to Set MODE 5, so hold the MODE button for 5 flashes of the red LED, release, and both LEDs will flash 5 times to confirm the MODE 5 setting (See video)